THE BEST DESIGN FOR THE BEST ENJOYMENT.
Views: 1 Author: Site Editor Publish Time: 26-11-2022 Origin: Site
Leaky toilet is a depressing problem, but this problem occurs frequently, causing great inconvenience to our daily life. So, why does the toilet leak? The flushing methods of different toilets may be different, but the principle is roughly the same. Let's take a look at the working principle of toilet flushing:
The toilet tank has various components, mainly water inlet valve, float ball, chain, water outlet valve and cup cover.
①When the flush button is pressed, the chain will lift the cup cover on the flush valve, allowing the water in the water tank to flow into the toilet through the outlet hole at the bottom, thereby realizing flushing. When the water level becomes low, the lid will drop to block the outlet hole.
②The float ball is connected to the water inlet valve. When flushing, the float ball will sink, and when it reaches the bottom, the water inlet valve will open to discharge water. When the water volume reaches a certain level, the float ball will rise to automatically close the water inlet. valve and stop the water.
③ There is also an overflow pipe in the middle, and when the water level is too high, the water is put into the toilet pool.
After you understand how your tank works, you can start looking for the source of the problem.
In the next article, we will introduce six toilet leaking problems and solutions.
