THE BEST DESIGN FOR THE BEST ENJOYMENT.
Views: 28 Author: Site Editor Publish Time: 29-12-2022 Origin: Site
1.Before installation, check whether the sewage pipe is unblocked and the installation ground is clean.
2. Install the matching sealing ring on the sewage outlet of the toilet.
3. Determine the installation position of the toilet. Align the toilet (sewage outlet) with the drain of the pipe and lower it slowly, adjust the correct position, then (use chalk or whiteboard marker) draw a marking line around the toilet and determine the installation hole.
4. Drill the mounting holes. Align the marked holes of the anchor screws, drill installation holes (diameter 10mm, depth 60mm) with a percussion drill, and install expansion nails. (No need to install anchor screws in general) 5. Put glass glue on the inner side of the marking line.
6. Align the installation hole and the surrounding glass glue to install the toilet, and slowly press down until it is level.
7. Put glass glue on the connection between the toilet and the ground, and trim the surrounding area to ensure the appearance.
8. Install the anchor screws.
9. Connect the water inlet pipe and check whether the filter is installed.
10. Clean the floor and tools, prohibit immediate use (glass glue generally takes 24 hours to cure), and keep the toilet area free of water within 24 hours.
