Classification Of Toilets

The toilet types are generally divided into five types: split type, one-piece type, wall-mounted type, flush type and siphon type.

The toilet, generally also refers to the toilet, belongs to a sanitary appliance in the field of building water supply and drainage materials, and is indispensable in our life.

Generally divided into the following five categories:

1. Split toilet. The water tank and base of the split toilet are fired separately, the molding rate is high, the cost is low, and the price is cheaper than the one-piece toilet.

2. One-piece toilet. First, the one-piece toilet has smooth lines, and the shape is more modern and fashionable than the one-piece toilet. Second, the one-piece type is easier to clean than the one-piece type. The one-piece water tank and the base are integrated, and the base is all-inclusive without grooves, so it is easy to clean. Third, the one-piece type is more water-saving than the one-piece type. Because the water level of the one-piece type is low, the pit distance of the one-piece toilet is generally shorter, in order to increase the flushing force and have good water-saving performance.

3. Wall-mounted toilet. The water tank of the wall-mounted toilet is embedded, so the quality requirements are very high. If it is broken, there is no way to repair it, and the price is also the most expensive among the toilet types. But its advantage is that it does not take up space, the shape is more fashionable, and it is used a lot abroad.

4. Flush toilet. The flush toilet uses the momentum of the water flow to discharge the feces. Generally, the pool wall is steeper and the water storage area is small, so that the water force is concentrated, the falling water force around the toilet ring is increased, and the flushing efficiency is high.

5. Siphon toilet. There are three types of siphon toilets: ordinary siphon, vortex siphon, and jet siphon.

(1) Ordinary siphon type: impulse: general, the inner wall flushing rate is general, there will be pollution and noise if there is water. Nowadays, in order to achieve a perfect siphon, many are equipped with a hydrating device, but this structure is more prone to blockage.

(2) During jet siphon flushing, the water comes out from the jet port. It first washes away the dirt on the inner wall, and then siphons it quickly to completely replace the stored water. The impact effect is good, and the flushing rate is average. , but there is still noise.

(3) The vortex siphon toilet has a drainage port at the bottom and a water outlet on the side. When flushing the inner wall of the toilet, a rotating eddy current will be generated. In order to thoroughly clean the inner wall of the toilet, the impulse effect is not said, that is, the drainage diameter is relatively small. It is easy to block, and the daily toilet should not pour some large dirt, basically there will be no problems.